Jun-2024 HP HPE6-A73 Actual Questions and Braindumps
HPE6-A73 Dumps To Pass HP Exam in 24 Hours - VCE4Plus
HPE6-A73 certification exam is part of the Aruba Certified Switching Professional (ACSP) certification track. Aruba Certified Switching Professional Exam certification track is designed to validate the skills and knowledge of IT professionals who work with Aruba switching technologies. The ACSP certification track includes two exams: HPE6-A73 Aruba Certified Switching Professional and HPE6-A78 Aruba Certified Switching Expert.
The HP HPE6-A73 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. The questions cover a wide range of topics, including VLANs, Spanning Tree Protocol (STP), link aggregation, multicast protocols, and Quality of Service (QoS). Candidates are expected to have a thorough understanding of these topics, as well as the ability to apply this knowledge in real-world situations.
HP HPE6-A73 exam is a certification exam designed for professionals who want to validate their skills and knowledge in the field of networking and switching. HPE6-A73 exam is focused on the ArubaOS-CX switching technology, which is widely used in enterprise networks worldwide. Passing HPE6-A73 exam validates the candidate's ability to design, implement, and manage modern network infrastructure with ArubaOS-CX Switching technology.
NEW QUESTION # 65
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)
- A. The encapsulation protocol used is GRE
- B. The encapsulation protocol used is VXLAN
- C. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
- D. The encapsulation protocol is UDP
- E. On the source AOS-CX switch, the destination specified is the administrator's desktop
Answer: A,C
NEW QUESTION # 66
A switch will apply a device profile to a port based on which pieces of information? (Select two.)
- A. IP header
- B. 802.1Q
- C. MAC address
- D. User role
- E. LLDP
Answer: A,C
NEW QUESTION # 67
A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.
Which type of licensing should be used by this customer?
- A. 20 Aruba NetEdit single node subscription licenses
- B. 1 Aruba NetEdit SMB License
- C. 20 Aruba NetEdit permanent licenses
- D. 25 Aruba NetEdit permanent licenses
Answer: A
NEW QUESTION # 68
An administrator is implementing a multicast solution in a multi-VLAN network Which statement is true about theconfiguration of the switches in the network?
- A. IGMP requires join and leave messages to graft and prune multicast streams between switches
- B. IGMP must be enabled on all routed interfaces where multicast traffic will traverse
- C. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic
- D. IGMP must be enabled on alt interfaces where multicast sources and receivers are connected
Answer: A
NEW QUESTION # 69
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Area 0 has 13 routes
- C. Core1 has no OSPF routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: A
NEW QUESTION # 70
An administrator creates an ACL rule with both the "count" and "log" option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?
- A. By default, a summarized log is created every minute with a count of the number of matches
- B. The "count" and "log" options are processed by the AOS-CX switch's hardware ASIC
- C. Logging will not include certificate and TLS events, but counting will
- D. The total in the "log" record and the count could contain different rule matching statistics
Answer: D
Explanation:
From the "AOS-CX 10.08 ACLs and Classifier Policies Guide" : "You may see a minor discrepancy between the ACL logging statistics and the hit counts statistics due to the time required to record the log message."
NEW QUESTION # 71
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement bidirectional forwarding detection (BFD)
- B. Reduce the hello and dead interval timers
- C. Implement graceful restart
- D. Implement route aggregation
Answer: D
NEW QUESTION # 72
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any web-servers group web-ports
- D. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
Answer: A
NEW QUESTION # 73
Examine the network topology.
The network is configured for OSPF with the following attributes:
* Core1 and Core2 and ABRs
* Area 1 has 20 networks in the 10.1.0.0/16 range
* Area 0 has 10 networks in the 10.0.0.0/16 range
* Area 2 has 50 networks in the 10.2.0.0/16 range
* The ASBR is importing a static route into Area 1
* Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Area 0 has 13 routes
- C. Core1 has no OSPF routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: A
NEW QUESTION # 74
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Limits can be defined only for broadcast and multicast traffic
- B. Rate limiting and egress queue shaping can be applied globally
- C. Only a traffic rate and burst size can be defined for a queue
- D. Rate limiting and egress queue shaping can be used to restrict inbound traffic
Answer: C
Explanation:
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.
NEW QUESTION # 75
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Area 0 has 13 routes
- C. Core1 has no OSPF routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: A
NEW QUESTION # 76
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. No downloadable user role exists
- B. The RADIUS request timed out to the AAA server
- C. MAC authentication has passed, but 802.1X authentication is in progress
- D. The port should be configured for 802.1X
Answer: D
NEW QUESTION # 77
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By implementing voice VLANs
- B. By defining device profiles with QOS settings
- C. By placing it in the strict priority queue
- D. By implementing weighted fair queueing (WFQ)
Answer: A
NEW QUESTION # 78
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA.
Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Speed up the AAA authentication process
- B. Define the account to implement downloadable user roles
- C. Define the account to implement change of authorization
- D. Implement replay protection for AAA messages
Answer: A
Explanation:
Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.
https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.html
NEW QUESTION # 79
Which statement is correct regarding ACLs and TCAM usage?
- A. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
- B. Using object groups consumes the same resources as specific ACE entries.
- C. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
- D. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
Answer: C
NEW QUESTION # 80
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities The campus involves a core as well as multiple access layers Which feature should the administrator implement to allow both VSX'Capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. VRRP
- B. VRF
- C. IP helper
- D. Active gateway
Answer: D
NEW QUESTION # 81
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - B. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - C. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - D. vsx
vrrp group 1
Answer: A
NEW QUESTION # 82
How is NetEdit installed at a customer location?
- A. Via a DVD using a virtualized platform like Microsoft's Hyper-V
- B. Via me Aruba Central cloud solution
- C. Via an Aruba NetEdit hardware appliance
- D. Via an OVA file and a virtualized platform like VMware's ESXi
Answer: D
NEW QUESTION # 83
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?
- A. Uses IPSec to protect the management traffic
- B. Uses IPSec to protect the management and data traffic
- C. Supports only port-based tunneling
- D. Uses the same management protocol as Aruba APs
Answer: C
NEW QUESTION # 84
......
Download the Latest HPE6-A73 Dump - 2024 HPE6-A73 Exam Question Bank: https://braindumpsschool.vce4plus.com/HP/HPE6-A73-valid-vce-dumps.html